sensor controller wall unit modul module converter Industrial PC Contport hygrostat
-- Product Name: A to Z Product Name: Z to A Sort by
Power 24 V DC, power supply not included Terminal with touch screen 7“, 800×480, ARM, 256MB RAM, Ethernet, microSD slot (card not delivered), Linux.
R005 is a data converter of the DL bus (two-wire communication bus Sauterfor the controllers of the series EY2400) to RS232. Interface RS232 is connected by three screw terminals.
1200..115200 bit/s, bus termination switch, optical separation, Rx, Tx, Power LEDsSupply 10..35 V DC / 14..24 V AC. DIN rail mounting, dimensions 98,7 x 64 x 36,2 mm
Same as R020, firmware extended by Modbus RTU / TCP routing functionality. Supply 10..35 V DC / 24 V AC. DIN rail mounting, dimensions 98,7 x 64 x 36,2 mm
Same as M031, firmware extended by Modbus RTU / TCP routing functionality. Supply 24 V DC / AC ± 10 %. DIN rail mounting, dimensions 98,7 x 64 x 36,2 mm
R060 is a Modbus RTU / RS485 and Modbus TCP to Belimo MP-Bus converter for control of up to 8 communicative Belimo actuators.
R085 and R086 are microprocessor-controlled converters of Landis & Gyr P-Bus for I/O modules Landis & Gyr PTM..., PTK... to Modbus RTU over RS485. The converters provide galvanical separation of both interfaces and the power part, and they are able to supply 32 or 64 BE (P-Bus load units) respectively.
R095 is a microprocessor-controlled M-Bus converter for energy and media meter readouts over RS232. The converter facilitates automatic baud rate switching, galvanical separation of power part and both interfaces, and it can host up to 25 M-Bus devices. This converter are successor of the previous type M095.
R096 is a microprocessor-controlled M-Bus converter for energy and media meter readouts over RS232. The converter facilitates automatic baud rate switching, galvanical separation of power part and both interfaces, and it can host up to 60 M-Bus devices. This converter are successor of the previous type M096.
The R560 is a microprocessor controlled, communicative module with 8 analogueinputs with variable measuring range: voltage, resistance, temperature, current loop). The module uses a RS485 bus for communication, and can be easily integrated in a variety of supervision and control systems.
open collector, 50 V DC, 0.5 A DIN rail mounting, dimensions 90 x 105 x 58 mmSupply 10..35 V DC / 24 V AC, Modbus RTU / RS485 galv. separated
4UI (0..10V, Pt1000, resistance, dry contact), 1AO (0..10V), 2DO (230V/5A), on-wall, AHU or cable tray installation, dimensions 217 x 115 x 40 mm, supply 10..35 V DC / 24 V AC, Modbus RTU / RS485 galv. separated
2x DI for potential-free push buttons, 2x DO - relay 230 V AC / 5 A resisitive load. Flush box mounting, dimensions 49 x 49 x 30 mmSupply 10..35 V DC / 24 V AC, Modbus RTU / RS485 galv. separated
Safety transformer 10 VA, installation to a flat surface with 2 screws.
Safety transformer 10 VA, installation to a flat surface with 2 screws. On-board are 2x 230V / 0,5 A triacs controlled by external 24 V AC signal for separation and pull-up of 2 PWM signals.
items: 10 15 20 50