sensor controller wall unit modul module converter Industrial PC Contport hygrostat
-- Product Name: A to Z Product Name: Z to A Sort by
R005 is a data converter of the DL bus (two-wire communication bus Sauterfor the controllers of the series EY2400) to RS232. Interface RS232 is connected by three screw terminals.
1200..115200 bit/s, bus termination switch, optical separation, Rx, Tx, Power LEDsSupply 10..35 V DC / 14..24 V AC. DIN rail mounting, dimensions 98,7 x 64 x 36,2 mm
Same as R020, firmware extended by Modbus RTU / TCP routing functionality. Supply 10..35 V DC / 24 V AC. DIN rail mounting, dimensions 98,7 x 64 x 36,2 mm
Same as M031, firmware extended by Modbus RTU / TCP routing functionality. Supply 24 V DC / AC ± 10 %. DIN rail mounting, dimensions 98,7 x 64 x 36,2 mm
R060 is a Modbus RTU / RS485 and Modbus TCP to Belimo MP-Bus converter for control of up to 8 communicative Belimo actuators.
Modbus TCP to DMX512 convertor, for control of up to 2× 512 light sources or other DMX compatible devices. Alternatively, it works as a DMX sniffer, reading packets transmitted to a DMX bus by a DMX controller, and providing the data as Modbus TCP server registers.
R080 is a service USB to RS485 converter. It is used to link RS485-based devices or networks of those devices to a PC. Keep in mind R080 is service tool and it is not for permanent communication with a RS485 network. R080 is replacement for converter M080.
R085 and R086 are microprocessor-controlled converters of Landis & Gyr P-Bus for I/O modules Landis & Gyr PTM..., PTK... to Modbus RTU over RS485. The converters provide galvanical separation of both interfaces and the power part, and they are able to supply 32 or 64 BE (P-Bus load units) respectively.
To read and control DALI bus over Modbus TCP, extended web interface for commissioning of the DALI bus
R095 is a microprocessor-controlled M-Bus converter for energy and media meter readouts over RS232. The converter facilitates automatic baud rate switching, galvanical separation of power part and both interfaces, and it can host up to 25 M-Bus devices. This converter are successor of the previous type M095.
R096 is a microprocessor-controlled M-Bus converter for energy and media meter readouts over RS232. The converter facilitates automatic baud rate switching, galvanical separation of power part and both interfaces, and it can host up to 60 M-Bus devices. This converter are successor of the previous type M096.