IPLC301 DDC controller MiniPLC - 4 serial ports, display

DDC controller MiniPLC - 4 serial ports, display

Supply 10..35 V DC / 24 V AC, DIN rail mounting, dimensions 90 x 58 x 105 mm

Powerful PowerPC-based process station, Ethernet, 2x RS485, 2x RS232, display, buttons, web server, programming in SoftPLC IDE.


The IPLC range is a family of digital process stations – communicative DDC controllers. All types contain one RS485 interface for connecting of I/O modules and one Ethernet port for communication with a management station or a web browser for remote management, extended types provide two more RS232 ports and one more RS485 port. 

  • Free programmable control units for HVAC systems and other applications with local HMI and web access
  • Optional customized firmware – protocol converters with data presentation
  • Data acquisition, processing, and presentation systems with advanced networking features
  • Communicative home automation etc. 

The controller contains an embedded operating system which boots up the runtime with the application. On the board there is a real time clock with battery backup, alarm buzzer, flash memory containing OS, runtime, application, and other data (time programs, setpoints etc.), and a watchdog. The controller also includes one Ethernet port, 2x RS232, and 2x RS485 serial interfaces. The RS485 communication is indicated by two LEDs at the bus end switch, another LED is software-controlled from the application. The SW1 – if set to ON – disables runtime start after power up and thus opens safe service access to the OS in case of corrupted application. 

The application is downloaded either in the Integrated Development Environment (IDE) or over a FTP connection in the file system of the controller.  

IPLC201 and IPLC301 provide a HMI: backlit 16 x 3 characters display and 6 pushbuttons. The user menu structure is configured in the LCD Menu Editor and contains actual values, setpoints, alarms, time schedules etc. in a tree structure. The branches are either freely accessible or protected by a PIN. 

The module is 105 mm wide and mounts on a standard DIN rail. 

Application examples: see domat – Design and application guide.

Use FRAME to install the controller into a front panel