FRAME Mounting frame for MiniPLC

For fixing of the MiniPLC into front panel: cut a 106 x 46 mm aperture and two holes for the screws in the front door, then use a 150 mm DIN rail to mount the MiniPLC from inside. The frame covers the aperture on the outer side.

Datasheet

The mounting FRAME for fixing of the MiniPLC into front panel. Cut a 106 x 46 mm aperture and two holes for the screws in the front door, then use a 150 mm DIN rail to mount the MiniPLC from inside. The frame covers the aperture on the outer side.
Frame colour is dark gray. Included are two screws M4 x 55 mm. Depth 8 mm.