Viewed products

  • Pokojový ovladač, RS485, teplota, 1DO
    Room unit,...

    Temperature and rh sensor, setting of...>>

  • Pokojový ovladač, RS485, teplota, 1DO
    Room unit,...

    Display 60 x 60 mm, temperature and rh...>>

  • Prostor. čidlo vlhkosti a teploty, vysoce přesné
    On-wall...

    10..90% rH: ±1.8% at 25 °C, 0..100% rH:...>>

  • Pokojový ovladač, RS485, teplota
    Room unit,...

    Display 60 x 60 mm, 5x button,...>>

  • Čidlo difer. tlaku vzduchu -1000...1000 Pa, displej
    Differ....

    Power 24 V AC/DC, output 0..10V + C/O...>>

  • Příložné čidlo teploty
    Strap-on...

    separate sensor - over 100°CStrap band...>>

  • RcWare Vision - vizualizace neomezená
    RcWare...

    Licence for SCADA system, unlimited...>>

  • Čidlo CO2 a teploty interiérové
    Room...

    Power supply 24 V AC/DC, outputs 2x 0..10...>>

  • Grafická centrála
    Management...

    Configuration for RcWare Vision, HDD...>>

  • DDC regulátor, displej
    DDC...

    Supply 24 V DC / 24 V AC, Front panel...>>

Home>Peripherals>Pressure Sensors>Differential pressure sensor for liquids and gases

SHD692 Differential pressure sensor for liquids and gases

Differential pressure sensor for liquids and gases

SHD 692 is a differential pressure transmitter for non-agressive liquids and gases. The media is separated from the sensor by a piezoceramic element.

Datasheet

SHD 692 is a differential pressure transmitter for non-agressive liquids and gases. The media is separated from the sensor by a piezoceramic element.

  • HVAC and industrial applications – measuring, control and registration of pressure in water, brine, air, and other gases. Not suitable for ammoniac and freon!

The piezoresistive element and electronics convert the position deviations of the ceramic element to voltage (0...10V) which is available at the terminals. Media temperatures may reach from ­15  to +80 °C. 

The sensors are not suitable for ammoniac and freon! 

The sensors do not require maintenance. They should be installed so that the condensed water does not cumulate in the electrical connector. Part of delivery is an installation sheet metal angle. Use separation loops for media with higher temperatures.