The mounting frame markPLCkit for fixing of the DDC controller mark or IPLC into front panel.
Cut a 102.5 x 45.5 mm aperture and two holes for the screws in the front door, then use a 150 mm DIN rail to mount the MiniPLC from inside. The frame covers the aperture on the outer side.
The mounting frame markPLCkit for fixing of the DDC controller mark or IPLC into front panel. Cut a 102.5 x 45.5 mm aperture and two holes for the screws in the front door, then use a 150 mm DIN rail to mount the MiniPLC from inside. The frame covers the aperture on the outer side.
Frame colour is black. Included are two screws M4 x 55 mm. Depth 9.4 mm.
No new products at this time
Omlouváme se, ale stránku kterou hledáte se nepodařilo najít.
Použijte hlavní menu nebo fulltextové vyhledávání v pravém rohu nahoře.
Domat Control System s.r.o
Company Headquarters
U Panasonicu 376, CZ – 530 06 Pardubice – Stare Civice, Czech Republic
Tel.: +420 461 100 823 , Fax: +420 226 013 092
info(at)domat.cz
Prague Office
Trebizskeho nam. 424, CZ – 250 67 Klecany, Czech Republic
Tel.: +420 222 365 395 , Fax: +420 226 013 092
info(at)domat.cz
Podporujeme program GREENLIGHT
pro snížení elektrické
energie na osvětlování.
© 2013 Domat Control System s.r.o.. All Rights Reserved
