RTF DP Room temperature sensor, switch 0-I-II-III, setpoint

Room temperature sensor, switch 0-I-II-III, setpoint

Wall mounted, dimensions 79 x 81 x 26 mm. Measuring element Pt1000, stage switch up to 50 V

Datasheet

Room control units with temperature sensors, setpoint knobs and other control elements. Various models available.

  • HVAC systems – room temperature measuring and setting
  • unit mode control, fan stage switching etc.

The sensor uses a sensing element, the signal of which is available at the screw terminals. Typical sensor provided is Pt1000 for domat I/O modules, other sensor types see table below. Temperature range is  ­30  to +70 °C. Other sensor data see RTF1 data sheet.

 The units are intended for operating in a normal and chemically non-aggressive environment. They do not need any servicing or maintenance and can be mounted in any position.

 The sensors are mounted with 2 or 4 screws on a flush-mounted junction box with 55 mm in diameter.

Options:

* Pt100, Ni1000-5000, Ni1000-6180, NTC1.8kOhm
* setpoint from the R6 range
* various scales / arrow shapes
* stage switch with resistors