RTR-S010 Room controller - heating and cooling
Setpoint +5...+30 °C, P band 1..5 K
Power supply 24 V AC/DC, output 2x 0..10 V / 10..0 V, 5 mA
Dimensions 95 x 97 x 30 mm, IP30
Setpoint +5...+30 °C, P band 1..5 K
Power supply 24 V AC/DC, output 2x 0..10 V / 10..0 V, 5 mA
Dimensions 95 x 97 x 30 mm, IP30
RTR-S is a series of electronic room heating and cooling controllers for wall mounting.
The internal temperature sensor is electronically processed and compared with the setpoint. The resulting output sequence is brought to 0..10 V heating and cooling analogue outputs. The setpoint is set either inside of the housing or with a knob on the front of the device.
The controllers are designed for use in standard environment. They do not require maintenance and can be installed in any position. Make sure that proper air circulation through the apertures is maintained. Fix the device with 2 or 4 screws on a 55 mm flush-mounted box or any flat surface. In the bottom there is an aperture for cable installation.