HTF50 Cable temperature sensor

Cable temperature sensor

-35...105 °C, dimensions Ø 6 x 50 mm + cable 1,5 m
Stainless steel tube, IP54
Measuring element Pt1000


HTF are a low-cost cable temperature sensors for universal use.

  • HVAC systems – hot water heating, floor heating, change-over sensor etc.

The sensor uses a sensing element, the signal of which is available at the screw terminals. Default sensor type provided is Pt1000, other sensor types see table below. Temperature range is

­-35 to +105 °C for PVC cable

­-50 to +180 °C for SiHF silicone cable

­-50 to +250 °C for SiHF teflon cable (Pt100, Pt1000; HTF 50 only)

­-50 to +350 °C for glass fibre cable (Pt100, Pt1000; HTF 50 only)

The sensors are intended for operating in an outdoor or industry environment. They do not need any servicing or maintenance and can be mounted in any position. 

Cable ends are protected by aluminium endings for installation into terminals. Standard cable length is 1,5 m, other lengths available on request.

* Pt100, Ni1000-5000, Ni1000-6180, NTC1.8kOhm
* silicone up to 180 °C, teflon up to 250 °C, length on request
* IP65, IP68