Home>I/O Modules and Convertors>Communication Converters>M-Bus / RS232 converter up to 25 M-Bus devices

R095 M-Bus / RS232 converter up to 25 M-Bus devices

M-Bus / RS232 converter up to 26 M-Bus devices

R095 is a microprocessor-controlled M-Bus converter for energy and media meter readouts over RS232. The converter facilitates automatic baud rate switching, galvanical separation of power part and both interfaces, and it can host up to 25 M-Bus devices. This converter are successor of the previous type M095.

Datasheet

R095 and R096 are microprocessor-controlled M-Bus converters for energy and media meter readouts over RS232. The converters facilitate automatic baud rate switching, galvanical separation of power part and both interfaces, and they can host up to 25 and 60 M-Bus devices. This converters are successors of the previous types M095 and M096. 
 
  • integration of M-Bus water, electricity, gas, and heat meters into PLC or SCADA over RS232 interface
     
The R095 converter connects up to 25 M-Bus devices to a process station or supervisory system over RS232. The R096, which provides stronger power supply, may host up to 60 M-Bus meters. Maximum communication speed is 9600 bps, with fully automatic baud rate switching – it is not necessary to set anything at the converter. 
 
All interfaces are mutually separated up to 1000 V DC. It is a very important feature which provides high reliability even in harsh industry environment with high EMC pollution. The M-Bus power source is protected against short-circuit and overvoltage.
 2 12/2016 Subject to technical changes. domat R095, R096
 
The M-Bus devices are connected over a 2-pole connector, regardless of polarity.  The RS232 bus is connected over a CANNON 9 M connector with cross (zero-modem) cable or over three terminals TxD, GND and RxD. Do not connect RS232 in bouth ways. 
 
The module is 70.4 mm wide and mounts on a standard DIN rail.